Uploading Building Information

• Navigate to Building Data
• Uploading Building Data

Navigate to Building Data

• Click the Building Data button, all the building data collected are displayed in a list.
• Once clicked, displays the Buildings Data list page.

                                                                                  Figure 5-1 Building Data

Overview:

• Building data collected by the user are stored on the local device memory. Once the user has internet access, the user can transfer the data to IMIS.

                                                                                 Figure 5-2 Building Data List

• Notice that the Building Identification Number (temporary) and Tax Code of the building are appended on the file name of the building data.

Tools:

                                                   

                                                                                 Figure 5-3 Building Data Tools

• Delete: The user can also delete the recorded data by clicking on the **'**DELETE' button. A message box will appear, to confirm the delete.
• View on Map: The user can also view the outline of the building on the map. The building footprint is displayed on the map.

                                                                                 Figure 5-4 View Building on Map

Uploading Building Data

• For uploading building data to IMIS, click ‘UPLOAD’ button.

                                                                             Figure 5-5 Building Data Upload

• Once the data has been uploaded to IMIS, a message box will appear. Press OK to exit.

  

  

                                                                      Figure 5-6 Upload Confirmation Box

  Overview:

• Once the data has been uploaded, stored data on the local device memory will be removed.

Note:

·         If the user tends to upload the Building data in which it has the intersected polygon, then the system will notify with a message as:

Figure: Validation Message of intersected polygon

The user has to delete the intersect polygon data and again collect a new data of the Building polygon by placing each marker on the edge of the building’s plinth and upload the data.